What is a difference betweent fireplace insert and freestanding stove?
The fireplace inserts are designed to be built-in. They must be connected to the chimney and usually also to a fresh air intake from the outside and then built up with, for example, insulating and construction boards or heat-resistant plasterboard. It is important that these materials are durable and heat-resistant.
Free-standing cookers, on the other hand, only need to be positioned at the intended location, at a suitable distance from combustible materials, and have the flue outlet connected to the chimney and a fresh air supply (cast-iron models do not have a fresh air intake).
What are the types of fireplace inserts?
We divide fireplace inserts into two basic categories - traditional fireplaces (which heat the air) and fireplaces with a water jacket (which are connected to the central heating system).
How do I know which model is suitable for me?
We need to consider what role the fireplace is to fulfil. Is it going to be decorative or is it going to permanently heat a specific space?
If the fireplace will be used for permanent heating, we need to choose a model with the right power. For traditional fireplaces and cookers, this can be calculated as follows:
It is assumed that for well-insulated houses we need 40 W/m3, for houses with poor thermal insulation - 60 W/m3.
- Calculation for an uninsulated old house. Area to be heated 150m2, room height 2.5m: Fireplace power = area (150m2) x room height (2.5m) x 60W Power of fireplace = 22,500W = 22/23kW We are looking for a fireplace with a power of approx. 22/23kW if we want to heat this entire area (150m2 e.g. by distributing heat through ducts to all rooms)
- calculation for a well-insulated, modern house. Area to be heated 150m2, room height 2.5m: Fireplace power = area (150m2) x room height (2.5m) x 40W Power of fireplace = 15,000W = 15kW We are looking for a fireplace with a power of approx. 15kW if we want to heat this entire area (150m2 e.g. by distributing the heat through ducts to all rooms)
What power do I need for a fireplace insert with a water jacket?
In the case of fireplace inserts with a water pocket, it is best to consult the plumber who will be installing the fireplace. You can also ask for advice by writing to us by email.
Along with the fireplace, can I order the accessories I need for its connection, installation, ventilation?
Of course, all you have to do is contact us by email and ask for a quote. We will prepare a comprehensive offer.
Is smoke escaping from the fireplace into the room?
No, fireplaces and cookers are designed in such a way that smoke does not escape into the room in which the fireplace is placed. However, if this is the case, it means that the door or glass seal needs to be replaced (this should be done once a year, once every two years. After contact with moisture, the seals harden and lose their properties).
What fuel should be burned in the fireplace?
Above all, use the fuel recommended by the manufacturer. We recommend burning wood with the appropriate moisture content (20%). Burning artificial materials is strongly advised against - this will damage the flue pipe and, in the long run, the fireplace.
Tips:
Choose wood with little bark, preferably from deciduous trees. Fruit trees are a good choice. Coniferous trees are discouraged (too much resin). It is advisable to light the fireplace/stove from the top (place the logs first, then the kindling on top of the logs).